NDS: ARM9 Module Playback

Functions
mm_bool	mmActive (void)
	Used to determine if a module is playing.
mm_word	mmGetPosition (void)
	Get current pattern order being played.
mm_word	mmGetPositionRow (void)
	Get current row being played.
void	mmPause (void)
	Pauses playback of the active module.
static void	mmPosition (mm_word position)
	Set playback position.
void	mmResume (void)
	Resume module playback.
void	mmSetModulePitch (mm_word pitch)
	Change the master pitch scale for module playback.
void	mmSetModuleTempo (mm_word tempo)
	Change the master tempo for module playback.
void	mmSetModuleVolume (mm_word volume)
	Use this function to change the master volume scale for module playback.
static void	mmSetPosition (mm_word position)
	Set the current sequence [aka order-list] position for the active module.
void	mmSetPositionEx (mm_word position, mm_word row)
	Set the current playback position.
void	mmStart (mm_word module_ID, mm_pmode mode)
	Begins playback of a module.
void	mmStop (void)
	Stops playback of the active module.

Detailed Description

Function Documentation

mmActive()

mm_bool mmActive

(

void

)

Used to determine if a module is playing.

Returns

Nonzero if a module is currently playing.

mmGetPosition()

mm_word mmGetPosition

(

void

)

Get current pattern order being played.

Returns

The current pattern.

mmGetPositionRow()

mm_word mmGetPositionRow

(

void

)

Get current row being played.

Returns

The current row.

mmPause()

void mmPause

(

void

)

Pauses playback of the active module.

Resume with mmResume().

DS Note: The DS hardware channels do not allow actual pausing. To implement pausing, Maxmod sets the channel frequencies to the minimal value (256Hz). This may cause some problems with certain samples (such as drum-loops) drifting out of sync with the song temporarily. This is not an issue with the interpolated audio mode since the channels are fed by software.

mmPosition()

static void mmPosition ( mm_word  position )

inlinestatic

Set playback position.

Deprecated:

Alias of mmSetPosition().

Parameters

position

New position in module sequence.

mmResume()

void mmResume

(

void

)

Resume module playback.

Pause with mmPause().

mmSetModulePitch()

void mmSetModulePitch

(

mm_word

pitch

)

Change the master pitch scale for module playback.

Specifying 1024 will play the module at its normal pitch. Minimum/Maximum range of the pitch change is +-1 octave.

Range = 0x200 -> 0x800 = 0.5 -> 2.0

Parameters

pitch

New pitch scale. Value = 1024 * 2 ^ (semitones / 12)

mmSetModuleTempo()

void mmSetModuleTempo

(

mm_word

tempo

)

Change the master tempo for module playback.

Specifying 1024 will play the module at its normal speed. Minimum and maximum values are 50% (512) and 200% (2048). Note that increasing the tempo will also increase the module processing load.

It uses a fixed point (Q10) value representing tempo.

Range = 0x200 -> 0x800 = 0.5 -> 2.0

Parameters

tempo

New tempo value. Tempo = (speed_percentage * 1024) / 100.

mmSetModuleVolume()

void mmSetModuleVolume

(

mm_word

volume

)

Use this function to change the master volume scale for module playback.

Parameters

volume

New volume level. Ranges from 0 (silent) to 1024 (normal).

mmSetPosition()

static void mmSetPosition ( mm_word  position )

inlinestatic

Set the current sequence [aka order-list] position for the active module.

Parameters

position

New position in module sequence.

mmSetPositionEx()

void mmSetPositionEx	(	mm_word	position,
		mm_word	row
	)

Set the current playback position.

It sets the sequence [aka order-list] position for the active module and the row inside the pattern.

Parameters

position	New position in module sequence.
row	New row in the destination pattern

mmStart()

void mmStart	(	mm_word	module_ID,
		mm_pmode	mode
	)

Begins playback of a module.

For DS, the module must be loaded into memory first (mmLoad).

Parameters

module_ID	Index of module to be played. Values are defined in the soundbank header output. (prefixed with "MOD_")
mode	Mode of playback. Can be MM_PLAY_LOOP (play and loop until stopped manually) or MM_PLAY_ONCE (play until end).

mmStop()

void mmStop

(

void

)

Stops playback of the active module.

Start again (from the beginning) with mmStart().

Any channels used by the active module will be freed.